永利会娱乐平台

欢迎您浏览永利会娱乐平台网址理念数控机械装备有限公司官方网站!公司主营:数控开料机,板式永利会娱乐平台开料机,板式永利会娱乐平台生产线
永利会娱乐平台网址理念数控机械装备有限公司 国内板式永利会娱乐平台设备一站式解决方案服务商

如何判断永利会娱乐平台网址开料机刀具的磨损状况

文章来源:板式永利会娱乐平台生产线    作者:卡维英编辑   发布时间:2018-05-16 14:53   浏览次数:

返回:新闻动态

  现在的永利会娱乐平台行业发展的十分的迅速,现在主要以板式永利会娱乐平台为主,顺应时代的发展板式永利会娱乐平台生产线也运用而生,成为制作永利会娱乐平台的主要设备,其中的永利会娱乐平台网址开料机又是非常重要的,开料机刀具是一大耗材,在其雕刻加工时,一定要注意刀具是否磨损,是否需要更换。那么我们该如何判断数控开料机刀具的磨损状况,下面一起去了解一下:

  Now the furniture industry is developing very quickly, now mainly with the plate furniture, complying with the development of the furniture production line of the times, it has become the main equipment for making furniture, and the Ji'nan opening machine is very important, the cutting tool is a big consumption material, it must be injected when it is engraved and processed. If the tool is worn or not, it needs to be replaced. So how do we determine the wear condition of CNC cutting tools?

永利会娱乐平台网址开料机

  永利会娱乐平台网址开料机刀具在切削过程中,刀具的前刀面和后刀面经常和切屑工件接触,产生剧烈摩擦、高温、压力等,所以前后刀面是最容易磨损的。

  In the cutting process, the front and rear face of the cutter often contact with the chip workpiece, resulting in severe friction, high temperature, pressure and so on, so the front and rear face is the most easy to wear.

  1、前刀面磨损切削塑性材料时,切屑与前刀面相互接触,以形成月牙洼磨损为主。

永利会娱乐平台  When the rake face is worn to cut plastic material, the chip and the rake face are in contact with each other to form the crescent wear.

  2、后刀面磨损切削脆性材料时,切屑与前刀面接触长度短,而相对刀刃钝圆使后刀面磨损较大。

  When the flank surface is worn to cut brittle materials, the contact length between the chip and the rake face is short, and the relative blunt edge makes the flank wear larger.

永利会娱乐平台  3、边界磨损切削钢料时,常在主切削刃靠近工件外皮以及副切削刃靠近刀尖处的后刀面上,磨出较深的沟纹。

  When the boundary is worn to cut the steel, the deeper groove is often worn on the flank of the main cutting edge near the outer surface of the workpiece and the edge of the sub cutting edge near the tool tip.

永利会娱乐平台网址开料机

  上面介绍的就是永利会娱乐平台网址开料机刀具磨损最为常见的几种形式,因为我们在使用中接触的板材不同,所以对于刀具的磨损形式也各不相同,这些需要消费者在使用的同时,经常注意观察总结一下,时间长了就明白应该如何判断刀具磨损的程度。

  The above introduction is the most common form of cutting tool wear in Ji'nan, because we are in contact with the plate different, so the form of tool wear and tear are different, these need consumers in the use of the same time, often pay attention to observation and summary, the time is long to understand how to judge the tool The degree of wear.

相关文章: 永利会娱乐平台网址开料机

永利会手机版 永利皇宫娱乐官网 永利国际娱乐 永利皇宫手机版 永利皇宫备用网址